Awning Windows

Pushbar Operator
Duratherm proprietary pushbar comprised of oxidized bronze alloy components and a solid brass bar, copper plated and oxidized to match bronze. The sill-mounted pushbar operator is designed to be manually operated for the entire length and to hold the sash at intermediate points. Available in one piece or hinged at mid-point.

Finishes: Oil-rubbed Bronze (US10B), Lacquered Red Bronze (US20A), White Bronze (US26D).

Egress: Available as quick-release pin at sash connection.

Roto-Gear Operator
Truth Maxim® stainless steel or EntryGard® steel roto gear operator with hardened steel drive worm and plastic slider for smooth operation. Cover and crank handle in high pressure die-cast zinc.

Finishes: Oil-rubbed Bronze (US10B), Satin Nickel (US15).

Egress: Available as quick-release lever at sash connection.

Sash Locks
Oxidized bronze alloy latches ensure positive, uniform locking action.

Finishes: Oil-rubbed Bronze (US10B), Lacquered Red Bronze (US20A), White Bronze (US26D).

Hinges
Heavy duty extension hinges, solid brass or zinc chromate coated steel. Hinges are designed to help the operator hold the sash in open positions, and to permit ready removal and replacement of the sash. Truth Maxim® 300 series stainless steel hinges are available for appropriate-sized units.

Optional Hardware
Custodial locks, sash restrictors, electric or manual remote operators.

1" x 1/4" tubular extruded frames in anodized bronze, mill finish aluminum or custom color painted aluminum. Mesh of 18 x 16 screen cloth held with vinyl spline, available in charcoal finished aluminum, mill finish aluminum, stainless steel or bright brass. Maximum width of screen mesh is 72". Wood-framed screens are available.

All glazing is per project specifications. Duratherm can accommodate most configurations and make-ups from 1/8" single glazed to a maximum of 1¾" security glass.

Clear glass opening: Unit height minus 6 7/8", unit width minus 7".

Continuous extruded silicone flap gasket set in rebate around the perimeter of the sash. Engaging the sash locks compresses the weather-strip to ensure a tight seal.

The minimums and maximums shown are intended as guidelines. For applications that exceed these ranges, please contact the factory for assistance.

Width
Minimum: 18”
Maximum: 66"

Height
Minimum: 18”
Maximum: 84"

Egress
Based on:
20" clear width
24" clear height
5.7 sq ft clear opening
Minimum unit width: 27"
Minimum unit height: 48"

To meet egress requirements:
At minimum unit width of: 27", height must be at least: 48"
At minimum unit height of: 48", width must be at least: 27"

Frame Depths
Standard: 6 1/4”
Minimum*: 5 1/2”
Maximum: 10”

(*Contact factory for frame depths less than 6¼")

Allowed 0.30 Test Result 0.02

Allowed 0.0 Test Result 0.0

Passed

Passed

N/A

Passed

Center of Glass:
ASTM C-236 U-value using Viracon VE1-2M Low E glass and Lawrence Berkeley Laboratories Winow 5.2 analysis program.

NFRC certified.

1": 0.29 with Argon: 0.24

Total Unit

1": 0.36 with Argon: 0.32

• ASTM E1996-05, ASTM E1886-05
• Tested at 42 psf
• Wind Zone 3, not including Dade County, FL
• Missile Level D

Note: Contact factory for size limitations and detail modification required for hurricane certified units.